|
|
Post by johnsxj on Jan 10, 2008 18:52:37 GMT -5
If you leave now, you MIGHT get there in time ;D ;D ;D Ryan, I WILL be there!!! Kurt is maybe 1/2 mile out of the way so I can pick up that rear track bar from him. |
|
|
|
Post by baseshakers on Jan 11, 2008 8:40:53 GMT -5
john, you rock. thanks!
|
|
|
|
Post by Scott on Jan 11, 2008 17:21:50 GMT -5
crap  I could have given the DS to someone John knows today  I'll bring it to the Trails meeting. |
|
|
|
Post by johnsxj on Jan 11, 2008 21:09:09 GMT -5
crap I could have given the DS to someone John knows today I'll bring it to the Trails meeting. If you were going to the lumber yard, I wouldn't have seen him anyhow. And Ayer is a bit more than a 1/2 mile out of the way  |
|
|
|
Post by Kurt on Jan 11, 2008 21:19:23 GMT -5
John,
I should be up and around if you want to swing by and grab the rear track bar in the morning before heading into Slummerville.
|
|
|
|
Post by johnsxj on Jan 11, 2008 21:20:41 GMT -5
John, I should be up and around if you want to swing by and grab the rear track bar in the morning before heading into Slummerville. You're pulling a Kelly on me here ;D ;D ;D ;D I had JUST PM'ed you about that  |
|
|
|
Post by Kurt on Jan 11, 2008 22:04:34 GMT -5
John, I should be up and around if you want to swing by and grab the rear track bar in the morning before heading into Slummerville. You're pulling a Kelly on me here ;D ;D ;D ;D I had JUST PM'ed you about that Great minds think alike ;D |
|
|
|
Post by Kodi on Jan 12, 2008 9:01:11 GMT -5
hey....why bring me into this!!! LOL!!!
|
|
|
|
Post by baseshakers on Jan 12, 2008 19:42:15 GMT -5
big thank you to john and andy for all your help today. couldn't have done it without you guys. lot's of great work was done but there is still lot's left to do. mini wrench fest day two commences at 11am tomorrow... who's down?  |
|
|
|
Post by baseshakers on Jan 21, 2008 22:30:33 GMT -5
so it's time for another mini-wrench fest! need to install the new(to me) rear track bar and check/tighten/replace rear control arm bushings. then align the front track bar and adjust toe in. also need to (still) modify the stock axles for full circle clips. maybe even check pinion angle and replace spark plugs. what's everybody up to after the trails committee meeting? less then a half hour to somerville...
|
|
|
|
Post by baseshakers on Jan 25, 2008 18:42:31 GMT -5
anybody wanna help? i'll prob be working both saturday after the meeting and sunday. pizza and beer provided! ;D
|
|
|
|
Post by Scott on Jan 25, 2008 18:57:31 GMT -5
I'll come by Saturday. |
|
|
|
Post by baseshakers on Jan 25, 2008 21:32:44 GMT -5
sweet! |
|
|
|
Post by baseshakers on Feb 2, 2008 16:39:30 GMT -5
i forgot to thank john and scott for helping last weekend. finally found the source of the problem! one of the super ride bushings had split and the sleeve could move over 1/8" by hand. that will def cause some weird handling! thanks again guys for all your help.
|
|
I could have given the DS to someone John knows today 
I'll bring it to the Trails meeting.
