V8 Swap

[ZAEDOCK]

Picked up this little guy. I already have a bellhousing I picked up at a swap years ago. The only thing I need are the clutch components. It has about 100K, but ran when pulled and is super clean inside. Plus, I couldn't beat the price - Free.

It's a Chevy TBI 305 out of a truck. I have to run some other numbers, but so far it's either a 170HP/255 ft lb tq or 190HP/275 ft lb tq. engine. A $400.00 set of Vortec heads will add 40-50 HP and a bunch of torque to those numbers.

The 2.5L runs very well though, and it obviously gets the job done. Plus it only has about 43K miles on it. I'm not sure what I'd going to do just yet.

[Scott]

I'll take the TBI THANK YOU in advance. ;D

[frank]

Its a shame it has to be covered in spaghetti . Nice color ! FjR68

[ZAEDOCK]

Dec 20, 2009 21:30:03 GMT -5 frank said:

Its a shame it has to be covered in spaghetti . Nice color ! FjR68

All the wire will be tucked into loom. The previous owner had it all out to mark the pins for a Jeep install. It's actually pretty cool. There are only a handful of sensors and the injector connections. I'll work my magic.