|
|
Post by extremeex1 on Mar 23, 2009 2:23:27 GMT -5
So. I have found out that SoCAl pretty much sucks for everything except a few great people and some awesome wheeling. Since the job market sucks right now i will be heading back to mass for the summer before heading back out west to salt lake. Good cause i have a good job and bad cause the jeep is going right to salt lake. So i will be around if anyone needs any help on their rig or wants a copilot on a trail run. See ya soon
|
|
|
|
Post by sidewaystim on Mar 23, 2009 4:36:30 GMT -5
What happened with Portal Tech? Yeah, I was in San Diego about 3 weeks ago and it does suck. I did visit the Fab School in Riverside while I was out there and got the tour from April. I'm at least gonna take the Crash Course when my wife gets out of school.
|
|
|
|
Post by extremeex1 on Mar 23, 2009 11:06:23 GMT -5
its still going to happen just waiting on military contracts to get finalized. then i will be heading out there in december no matter what. The Crash course is a great idea Troy came up with. you will learn a ton in a really short time. take lots of notes.
|
|
|
|
Post by smileyfish on Mar 23, 2009 15:24:16 GMT -5
more info on the crash corse please.
and welcome back tj, well soon.
any time you want a seat i have one for you.
|
|
|
|
Post by sidewaystim on Mar 23, 2009 17:09:26 GMT -5
www.thefabschool.com/index.shtml4 Week "Crash" Course Our 4 Week "Crash" Course in fabrication course teachs the basic fundamentals of welding, tube notching, bending, duplicating and suspension. This course meets twice a week for six hours for a total of 48 hours and lasts approximately one month. The Fab School can assist students with obtaining temporary housing and has financing available with payments as low as 40 dollars a month. Students must supply their own welding helmet, welding gloves, tape measure, welding pliers, 12 foot tape measure, and safety glasses. Students will be required to follow all safety rules, dress code requirements, and all other regulations mandated by the institution. ***This course does not offer job placement assistance.*** Contact us today for more information on geting started in the world of off-road fabrication! TOLL FREE: 1-877-411-WELD
|
|
|
|
Post by extremeex1 on Mar 23, 2009 17:54:22 GMT -5
Thanks for the offer ont he seat and i'll probably have to take you up on it on one of the runs this summer to get my wheeling fix in. Granted i am planning a couple flights out to salt lake to wheel with my own rig too.
|
|
|
|
Post by smileyfish on Mar 23, 2009 18:44:14 GMT -5
you stll interested in moab, tj?
|
|
|
|
Post by extremeex1 on Mar 23, 2009 20:36:49 GMT -5
yes i am still interested. depending on the time frame i may already be ready to make to move out that way around the same time. or jsut fly out and have my buddy meet me down there with my jeep.
|
|
|
|
Post by extremeex1 on Nov 1, 2009 9:11:03 GMT -5
So the deal in salt lake wasn't worth it in the long run. Guys are awesome but no money in it for me plus dont want to really sit and just build axles all day long. He is stopping the custom building to focus on his axles. Granted they are pretty nice. But $15 an hour to run the shop and just build axles all day isnt really worth it. So i am staying around here. See you around. Im going to try and do some custom work here and there on weekends after i get my jeep back here and finished. See you on the trails.
|
|
|
|
Post by Kodi on Nov 9, 2009 6:54:28 GMT -5
HURRY!!!! Where's your sidekick!?
|
|
|
|
Post by extremeex1 on Nov 10, 2009 20:36:22 GMT -5
oh he is around kicking tires trying to figure out the whole wrangler world
|
|
|
|
Post by Kodi on Nov 14, 2009 6:23:41 GMT -5
so many options,so little time. (or money!)
|
|
|
|
Post by extremeex1 on Nov 14, 2009 9:39:45 GMT -5
so so so true
|
|
|
|
Post by RedLightRubi on Nov 14, 2009 17:17:16 GMT -5
OH DON'T WORRY.... haha TJ and I are going to have some fun molesting a certain low mileage Rubicon.
|
|
|
|
Post by Kodi on Nov 15, 2009 7:09:45 GMT -5
eeeeek! Molesting!  I thought that was Joes gig!?? You need an avatar my man! Make one! do it NOW! |
|
I thought that was Joes gig!??