|
|
Post by jpcamb on Sept 15, 2009 19:10:09 GMT -5
So my new trail rig has a 4" coil lift and 1" body lift along with a tummy tuck. It came without the rear sway bar. I was planning on hitting the bone yard to get one and then realized that a stock sway bar may not work all that well here. Should I be looking 4wd.com for something like this to work or will it still work and just be higher than needed if I buy a OEM part from the bone yard?  Also does it have to be off a TJ or will a Cherokee or YJ work as well. Rear is a dana 35... thanks Jeff |
|
|
|
Post by johnsxj on Sept 15, 2009 19:17:21 GMT -5
Get a TJ rear sway bar from a bone yard.
The only thing you might need to pick up would be some extended links for the amount of suspension lift you have.
|
|
|
|
Post by jpcamb on Sept 15, 2009 20:34:47 GMT -5
Thanks John!
|
|
|
|
Post by Captian Carnage on Sept 16, 2009 14:17:25 GMT -5
I just dont run a rear sway bar Its been off for 3 years
I have a set of Extended links from RE that is made for a 3 1/2 lift It gave me 4 1/2 inches
If you want them pm me
Make sure you have the Clamps that hold it to the frame
|
|
|
|
Post by frank on Sept 16, 2009 16:10:06 GMT -5
Whats a sway bar ? FjR68
|
|
|
|
Post by jpcamb on Sept 17, 2009 7:44:01 GMT -5
I just dont run a rear sway bar Its been off for 3 years I have a set of Extended links from RE that is made for a 3 1/2 lift It gave me 4 1/2 inches If you want them pm me Make sure you have the Clamps that hold it to the frame Thanks Brian, PM sent |
|
Also does it have to be off a TJ or will a Cherokee or YJ work as well. Rear is a dana 35...
